Stainless Steel W4 Worm-Drive Hose Clips Clamps

These high quality worm-drive hose clips are made from T304 Stainless Steel, featuring W4 construction meaning the screw and screw housing are also stainless steel as well as the band.

Can be tightened with a screwdriver or a 7mm socket/spanner for ease of fitting.

The band is unperforated meaning they are suitable for use with softer silicone hoses as well as all other types of rubber hose.

New Mix & Match Option

You can now swap any clamps in a 2, 4 or 10 pack for a smaller size, allowing you to order exactly how many you need of each size. For example, if you need 5x 32-50mm, 3x 25-40mm and 2x 20-32mm you could order a 10 pack of 32-50mm and swap 5 clips for the smaller sizes.

Just add a note at checkout requesting the sizes you wish to swap, or contact us immediately after purchasing with the sizes required. Please note clips can only be swapped for a smaller size, not larger.

Full Bag Quantities

The quantity of clips in our Full Bag option varies by clamp size:

• 8mm-12mm size up to 20mm-32mm size - 100 clamps per Full Bag
• 25mm-40mm size up to 40mm-60mm size - 50 clamps per Full Bag
• 50mm-70mm size up to 80mm-100mm size - 25 clamps per Full Bag
• 90mm-110mm size up to 100mm-120mm size - 20 clamps per Full Bag

Fitting & Sizing

Each clamp has a specific range that it can be tightened between. To determine the size you need measure the outer diameter of the hose you are fitting, and the table below shows which clamp size we recommend using for any given hose O.D.

Note: Care should be taken with any hose clamp not to overtighten the clamp as this can damage pipe or hose, and possibly cause leaks. Please see the table below for torque specifications for each size.

Specification

• Fitment: Universal - suitable for all rubber fuel, oil, coolant and air hoses
• Construction: 100% T304 Stainless Steel
• Warranty: 3 Years (UK based)